Extended mobile controller

The HCY is a universal control device for mobile hydraulic applications. It is based on the proven Všlkel platform, which contains two decades' experience in control system engineering. Safety features and a CAN network make it possible to use the HCY control system in a versatile manner and for complex tasks. The controller is available with customer-specific software. The PC program ConDoc enables a rapid adaptation to the individual machine data as well as a comprehensive diagnosis. The HCY hardware is also available as programmable logic controller. In this way the advantages of a controller tested in rough environment complement with the benefits of free programming according to the international standard IEC 61131-3. Integrated current drivers for proportional solenoids, analogue inputs, frequency and switch inputs effect quick programming.

Highlights

• Robust aluminum housing for outdoor use, equipped with a ventilation membrane and a status LED, protection category IP65, IP69K
• 2 micro-controllers XC167CI / 40 MHz and C505CA / 4 MHz for reciprocal monitoring, each with voltage regulation, cycle generation and watchdog
• 6 configurable switch inputs
• 4 configurable frequency inputs
• 1 rotary frequency sensor input, pickup
• 1 clamp W, frequency input
• 8 configurable analogue inputs
• 4 switch outputs
• 6 proportional solenoid outputs
• 1 safety relay for safety cut off
• 1 power supply output for Namur sensors and potentiometers
• Power supply: 8 V_DC to 32 V_DC
• 2 CAN interfaces for communication, expansion, connection
  Use of CAN network variables via standard CAN (11 bit ID) and extended CAN (29 bit ID) for easy information exchange between two or more controllers
  Adjustable CAN end resistors
• 1 RS-232 interface for communication with programming software
• Reverse pole and overvoltage protection
• Flexible use of inputs and outputs due to parameter setting for selected functions
• Additional means of switching off using a safety relay according to the principle of closed circuit current
• Monitoring the current supply and reverse measurement of all outputs
• Various possibilities for monitoring inputs and outputs (e.g. recognition of cable breaks and short circuits).
• Plausibility checks for safety-critical parameters by logic operation and limit value monitoring