Basic-Terminal complies with the Isobus-standard ISO 11783. As a universal terminal it is manufacturer-independent and can be used with all machines that comply with the Isobus-standard. Baisc-Terminal provides all basic functions needed to to operate Isobus machines.

Connections

Basic-Terminal has three connectors signed as A, B and C.

+Vin and -Vin serve the voltage supply. The signals marked with *) correspond to CiA 303-1 allocation.

The signals CAN_L and CAN_H are connected internally and are for looping through the CAN network. When TBC_PWR_in is put on the voltage (= +Vin), the terminal can be switched on. When switched on, the terminal delivers the distribution voltage (minus 1,2 V) with maximum 140 mA on TBC_PWR_out for the supply of the terminator networks.

Pin Signal

The connector B is the second CAN interface which can be used e.g. as a J1939 interface. The connector C is an RS-232 interface with 12-V power supply on pin 4 for a GPS receiver and +5 V on pin 9 for Bluetooth.

Technical data

• Operating voltage: 10 V to 24 V
• Operating temperature: −10 °C to +70 °C
• Storage temperature: −20 °C to +70 °C
• Weight: 1,3 kg
• Measurements (L × W × H): 220 mm × 210 mm × 95 mm
• Protection class IP64 according to DIN 40050/15
• EMC according to ISO 14982 / PREN 55025 / Level 4
• ESD protection according to ISO 10605 Level 3
• Current consumption max. 0,5 A (< 5 W)
• Display VGA (320 pixel × 240 pixel) monochrome