The Lumberg Automation CANopen LioN-S modules are up to the high electromechanical standard of the decentral automation sector.
They work as a slave in a master/slave environment.
The connection of the newtwork, the system/sensor power supply and also the actuator power supply is done with a 5-pole M12 connector. The actuator power supply is also realized with a 5-pole M12 connector. Standard 3-pole M8 connectors are used for the copeling of the sensors and actuators.
Each channel of the 0930 CSL 650 universal module can be used as an input or output in free combination without any configuration.

Degree of protection: IP 67
Operating temperature: −10 °C to +60 °C
Node ID: 1 to 99_d (Hardware switch setting), 1 to 127_d (Software setting)
Default address: 63_d

You will find all technical information at our website in detail.

Following types are available:

0930 CSL 650: 8 × M8 8 input/8 output 0,5 A universal
0930 CSL 651: 8 × M8 8 input PNP